TIAL WASTEGATE SPRING CHART MAC

The plain spring is to only be used with the MV-R wastegate. However, the blue (old color: maroon) spring may be used individually with the MV-R wastegate. The blue (old color: maroon) and white (old color: copper) are designed to work in multi-spring applications to obtain the pressure ratings listed for the MV-S wastegate, they are not designed to be used individually with the MV-S. Manufactured from 17-7PH stainless steel, they provide consistent pressure at high temperature, and resist 'relaxing' at temperatures up to 900degF (483degC), well beyond the required temperatures of the actuator. Please reference the chart below if you need to match up old springs to their replacements. TiALSport springs are engineered for precise control under extreme conditions. Mixing old and new colored springs in your wastegate will still allow you to achieve the designated pressure ratings. Spring characteristics and dimensions have not changed, just the paint color. This will be my first time running this type of setup, target boost pressure will be 30, but possibly 35 psi.

TIAL WASTEGATE SPRING CHART MAC

The plain spring is to only be used with the MV-R wastegate. Dual Tial wastegates and spring choice with MAC Hey guys, So I recently switched to a 6 boost high mount running dual tial MVS 38mm wastegates. TiALВ® has recently changed their MV-S and MV-R spring colors to make them easier to identify. However, the blue (old color: maroon) spring may be used individually with the MV-R wastegate. In these multiple spring setups the resultant pressure is equal to the sum of the individual springs. Higher pressure settings will require the use of multiple springs working together. The boost pressures are approximations from TiALВ® based on equal intake and exhaust manifold pressures, results will vary slightly for different applications. Please see the information below to decide which spring(s) you need for your application. All TiALВ® wastegate springs are constructed from 17-7 PH Stainless Steel which is capable of maintaining consistent pressures up to 900 Deg F (483 Deg C). Pumpkins come in several sizes and colors.

Boost pressures are only an approximation based on intake manifold pressures equaling exhaust manifold pressure.These TiALВ® Wastegate Springs are for use in TiALВ® MV-S and MV-R wastegates. Tial wastegate spring chart & BAR to PSI conversion table Posted by 99gstracer, Nov 16, 2006. The farm, owned by brothers Timmy Collins and Tommy Collins, has sold its goods at the location for 23 years.

When using a Dual Spring setup the resultant pressure is equal to the sum of the individual springs. Higher Pressure Settings require the use of both Small and Large diameter springs.Available in 4 sizes and various spring rates. Each unit is adjustable as well as rebuildable. These figures are only a basic guideline and may vary with your application. Our GReddy external wastegates are made from the highest quality materials to insure both stability and durability in a turbochargers boost control. Please reference the chart below to confirm you are purchasing the correct spring for your application. 25 Bar / 3.6 psi for WG44/46 Spring Pressure Reference GuideД«elow you will find the recommended spring for desired boost pressure with your wastegate. MVR 44mm Spring Pressure Chart: BAR: PSI: Spring Color: (For newer MVR built after 1-16-2012) 1.5: 21.75: Plain Black Blue Yellow: 1.4: 20.30: Plain Black Red Yellow: 1.3: 21.75: Plain White Blue Green: 1.2: 17.40: Black Blue Yellow: 1.1: 15.95: Yellow Red Black: 1: 14.50: Green Blue Black: 0.9: 13.05: Green Red Black: 0.8: 11.60: Black Blue: 0.7: 10.15: Black Red: 0.6: 8.70: Green Blue: 0.5: 7.25: Green Red: 0.4: 5.